Limited quantities in stock. Please call for availability.
Rosco TV Paints provide maximum and minimum reflectance values to meet the sensitive contrast requirements for standard television and video systems.
Description |
Price |
|
 |
TV White (#05735) is a light Neutral gray that meets specifications for 60% reflectance, the maximum brightness for use in video white balancing. | $44.25/gallon |
 |
TV Black (#05740) is a rich matter black which meets specifications for 3% reflectance, the minimum brightness intended for transmission. | $44.25/gallon |
|
FINISH: Matte. SOLVENT: Water. BINDER TYPE: Vinyl Acrylic.
DILUTION:
Use straight out of the can. SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking. FILM THICKNESS: 2 mil. Dry Film. COVERAGE: Appx 300 sq. ft. per gallon. AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours. CLEAN-UP: Soap and water. |
 |
Limited quantities in stock. Please call for availability.
Rosco Chroma Key Paints have been formulated with the assistance of video technicians throughout the country. They are manufactured to provide the high luminance values and color saturation for keying effects.
Description |
Price |
|
 |
5710:
Chroma Key Blue |
$73.25/Gallon |
 |
5711:
Chroma Key Green |
$73.25/Gallon |
| FINISH:
Matte. SOLVENT:
Water. BINDER TYPE:
Vinyl Acrylic.
DILUTION:
Use straight out of the can. SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking. FILM THICKNESS:
2 mil. Dry Film. AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours. CLEAN-UP: Soap and water. |
Limited quantities in stock. Please call for
availability.
Rosco Ultimatte Paints have been specifically formulated to provide the correct luminance and RGB Values for optimum operation with the Ultimatte compositing system.
Rosco Ultimatte Paints are recommended for interior and exterior surfaces including fabrics, wallboard, plastics, plaster, brick, and concrete.
Ultimatte Paints have been designed for use with the Ultimatte System. However they can be used with Chroma Key systems as well. They provide optimal luminance and color separation when shot on either film or video.
Rosco Ultimatte Super Blue is a darker, purer blue than Ultimatte Blue. It is designed primarily for use in shooting film for Ultimatte compositing. In addition, it can be used to reduce glare on horizontal surfaces that might interfere with a clean matte.
Description |
Price |
|
 |
5720: Ultimatte Blue (5 Gallon Special Order Only $332.25) |
$73.25/gallon |
 |
5721: Ultimatte Green (5 Gallon Special Order Only $488.00) |
$109.50/gallon |
 |
5722: Ultimatte Super Blue (5 Gallon Special Order Only $347.50) |
$80.00/gallon |
|
FINISH:
Matte SOLVENT:
Water. BINDER TYPE:
Vinyl Acrylic. DILUTION:
Use straight out of the can. SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation. APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking. FILM THICKNESS: 2 mil. Dry Film. COVERAGE: Approx 300 sq. ft. per gallon. AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours. CLEAN-UP: Soap and water. |
Home | About Us | Search Our Site | Costume Rentals | Costume Sales | Books & Videos | Gilbert & Sullivan | Wigs | Hats | Theatrical Gifts | Makeup | Stage Curtains | Scenic Fabric | Scenic Paint | Scenic Supplies | Stage Lamps | Stage Lights | Special Effects | Directions/Hours| Links | Contact Us | Site Map